Description The FAN7382MX is a monolithic half-bridge Gate Driver IC for fluorescent lamp ballast. It can drive MOSFETs and IGBTs that operate up to +600V. High-voltage process and common-mode noise...
Description The LM3886 is a high-performance audio power amplifier capable of delivering 68W of continuous average power to a 4Ω load and 38W into 8Ω with 0.1% THD+N from 20Hz–20kHz....
Description It's a Ad8607, Dual Operational Amplifier, 400 kHz, 0.1 V/µs, 1.8V to 5V, SOIC, 8 Pins. This dual operational amplifier generally use in battery power instrumentation, multiple filters, sensor....
Description LT1013 is the first precision dual op-amp in the 8-pin industry standard configuration, upgrading the performance of such popular devices as the MC1458/1558, LM158 and OP-221. The LT1013’s specifications...
Description MC33172 is a monolithic op-amp in which high-quality bipolar fabrication and unique design principles are used. Without the usage of JFET device technology, these devices run at 180 A...
Description The Isolation Amplifier IC A7840 is intended for use in electronic motor drives to sense current. The A7840 detects the analogue voltage drop that results from motor currents flowing through an external resistor in...
Description AZ4580P is a type of Low Noise operational amplifier. As we already know, the amplifier is used to amplify the signal; it increases the strength of the weak signal for...
Description The LF347 Quad J-FET Operational Amplifier are high speed J–FET input quad operational amplifiers incorporating well matched, high voltage J–FET and bipolar transistors in a monolithic integrated circuit. The devices feature...
Description The A7800/HCPL-7800(A) isolation amplifier family was designed for current sensing in electronic motor drives. The A7800 detects the analogue voltage drop caused by motor currents flowing through an external...
Description The LM833 is a monolithic dual operational amplifier that is particularly well suited for audio applications. It features high frequency performance (15MHz Gain Bandwidth product, 7V/s slew rate), low voltage noise (4.5nV/Hz), and...
Description The UTC LM339 consists of four independent voltage comparators designed specifically to operate from a single power supply over a wide voltage range. Operation from split power supplies is also possible,...
Description The UTC LM358 consists of two independent high gain, internally frequency compensated operational amplifier. It can be operated from a single power supply and also split power supplies. FEATURES...
Description STMicroelectronics TL084C is a JFET Quad Operational Amplifier. The TL084C is a high-speed, JFET input, a quad operational amplifier with well-matched, high voltage JFET and bipolar transistors in a monolithic...
Description These monolithic integrated circuits with low-noise JFET input operational amplifiers combine two cutting-edge analogue technologies. Each internally corrected operational amplifier features a well-matched high-voltage JFET input device for low...
Description It is a Dual Operational Transconductance Amplifiers With Linearizing Diodes and Buffers. Each of the two current 2 regulated transconductance amplifiers in the LM13700 series has differential inputs and...
Description The STMicroelectronics NE5532 is a dual low-noise operational amplifier. The NE5532 device is a high-performance operational amplifier combining excellent DC and AC characteristics. They feature very low noise, high output-drive...
Description The UTC LM324 consists of four independent, high gain internally frequency compensated operational amplifiers which are designed specifically to operate from a single power supply over a wide voltage...
Description The JRC2068 is a dual operational amplifier with high performance and low noise. This amplifier has a popular pin-out, excellent noise performance, and low total harmonic distortion. This amplifier...
Description The NE5532 is a high-performance operational amplifier with good DC and AC characteristics. It has low noise, a high output drive capability, wide bandwidths, low distortion, a fast slew...
Description The LM358 is a single-supply dual op-amp IC that integrates two op-amps that are powered by a single power supply. It is one-half of the LM324 Quad op-amp, which...
Description The NE5534 devices are high-performance operational amplifiers combining excellent DC and AC characteristics. Some of the features include very low noise, high output drive capability, high unity-gain and maximum-output swing...
Description The NJM5532 is a high performance dual low noise operational amplifier. Compared to the standard dual operational amplifiers, such as the NJM1458, it shows better noise performance, improved output...
Description The Isolation Amplifier IC A7840 is intended for use in electronic motor drives to sense current. The A7840 detects the analogue voltage drop that results from motor currents flowing...
Description Trimming at the wafer stage results in a very low input offset voltage (75 V maximum for OP07E). These low offset voltages obviate the requirement for external nulling in...
