Description KSD01F-110 is a TO-220-packaged Temperature Switch/Thermal switch. The Calibrated Bimetal will quickly connect the circuits (usually opened) when the outside temperature is too high. When the temperature drops to...
Description KSD301 70°C Thermal Control Switch 250V 10A NO (Normally Open) The original state of temperature control switch contact is open and closed when the temperature sensing exceeds the rated temperature....
Description SPDT(Single Pole Double Throw) relay is used as a switch for high current AC/DC appliances which need to be controlled from a microcontroller or sensor output. 5V PCB Mount...
Description It's a KYOCERA 10pf 50v of 0805package SMD type capacitor. This multilayer ceramic capacitor has a fixed value and ceramic material act as the dielectric. This ceramic capacitor is used...
Description It's a KYOCERA 1uf 50v of 1206 package SMD type capacitor. This multilayer ceramic capacitor has a fixed value and ceramic material act as the dielectric. This ceramic capacitor are...
Description It's a KYOCERA 22pf 50v of 1206 package SMD type capacitor. This multilayer ceramic capacitor has a fixed value and ceramic material act as the dielectric. This ceramic capacitor is...
Description It's a KYOCERA 33nf/0.033uf 50v of 1206 package SMD type capacitor. This multilayer ceramic capacitor has a fixed value and ceramic material act as the dielectric. This ceramic capacitor is...
Description It's a KYOCERA 4700pf/4.7nf 50v of 0805 package SMD type capacitor. This multilayer ceramic capacitor has a fixed value and ceramic material act as the dielectric. This ceramic capacitor is...
Description It's a KYOCERA 470nf/0.47uf 50v of 1206 package SMD type capacitor. This multilayer ceramic capacitor has a fixed value and ceramic material act as the dielectric. This ceramic capacitor is...
Description It's a KYOCERA 47uf 16v of 1206 package SMD type capacitor. This multilayer ceramic capacitor has a fixed value and ceramic material act as the dielectric. This ceramic capacitor is...
Description L293D is a typical Motor driver that allows DC motors to drive in either direction. L293D is a 16-pin IC that can control a set of two DC motors simultaneously...
Description It's a L293d motor driver module. This motor driver module operate on 4.5v to 12v dc. It has maximum load current 600mA per motor. This module generally use for...
Description This is an L293D Motor Driver Module with Voltage Protection. It can provide bidirectional drive currents of up to 600 mA at voltages from 4.5 V to 36 V....
Description This is an L293d Motor Driving Module. It is an l293d module that can drive a 4 DC Motor in one direction, or drive a 2 DC Motor in both directions....
Description It's a L293D motor shield for Arduino. This type motor driver generally use with Arduino for control the more than one motor. Through this motor driver can drive 4 bidirectional...
Description This L293ESP Node MCU Motor Driver Shield is suitable for controlling a motor from a distance using a wireless connection. It is designed with a socket for connecting WiFi...
Description :- It's a L298 2A dual motor driver module with PWM controller. This is a High power motor driver perfect for driving DC motor and stepper motor. It can Can...
Description This is an L298N Motor Driver Controller Module Dual H-Bridge Motor Driver. The L298N Motor Driver Module is a dual full-bridge driver with high voltage and current. It accepts TTL logic-level...
Description This is an L298N Motor Driver Controller Module Dual H-Bridge Motor Driver. The L298N Motor Driver Module is a dual full-bridge driver with high voltage and current. It accepts TTL logic-level...
Description It is a three-terminal positive regulator. The L7805CD2T is a widely used linear voltage regulator. It has built-in current limiting, thermal shutdown, and safe operating area protection which makes them...
Description The L78 series of three-terminal positive regulators is a 24 Volt Voltage Regulator in TO-220 Package. By providing local on-card regulation, these regulators can do away with the distribution issues...
Description The L9110 module is a two-way or dual-channel H-bridge motor controller or driver module with a small footprint. The module has two L9110 ICs, each of which can operate...
Description This is a 5 mW laser diode module that emits a small intense focused beam of visible red light. The module can be used with an Arduino and photoresistor...
Description This is an LDR Light Sensor Module. Light Dependent Resistor is a special type of resistor used for the detection of light. As it is a type of resistor...
