Description These devices are made up of four separate high-gain frequency-compensated operational amplifiers that are meant to operate from a single power source across a wide voltage range. Split-supply operation...
Description The LM336 integrated circuits are shunt regulators with a precision of 2.5V. The monolithic IC voltage reference operates as a 2.5V Zener with a low-temperature coefficient and a dynamic...
Description The LM339 consist of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also...
Description :- The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius (Centigrade) temperature. The LM35 thus has an advantage over linear temperature...
Description The LM358 is a single-supply dual op-amp IC that integrates two op-amps that are powered by a single power supply. It is one-half of the LM324 Quad op-amp, which...
Description The LM358 is a dual op-amp IC that integrates two op-amps that are powered by a single power supply. It is one half of the LM324 Quad op-amp, which...
Description This amplifier module is based on the LM358 operational amplifier, which is a high-gain, frequency adjusted operational amplifier designed to operate across a wide voltage range from a single...
Description The LM35D Analog Temperature Sensor Module is based on the semiconductor LM35 temperature sensor, designed for precise ambient air temperature detection. With a sensitivity of 10mV per degree Celsius,...
Description The LM386 Audio Amplifier Module has a 10K adjustable resistance. It is intended for use in low-voltage consumer applications. The gain is by default set to 20 to keep...
Description The LM386 is power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition...
Description The LM3886 is a high-performance audio power amplifier capable of delivering 68W of continuous average power to a 4Ω load and 38W into 8Ω with 0.1% THD+N from 20Hz–20kHz....
Description The LM3914 is a monolithic integrated circuit that detects analog voltage levels and operates ten LEDs to create a linear analog display. With a single pin, the display transforms...
Description :- The LM3915 is a monolithic integrated circuit that senses analog voltage levels and drives ten LEDS, LCDs or vacuum fluorescent displays, providing a logarithmic 3 dB/step analog display....
Description These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also...
Description : - LM393 Electret Microphone module uses LM393 as its main Op-Amp and is a single channel signal output sensor module. LM393 module has 3 pins which are Out,...
Description The LM393 is made up of two independent precision voltage comparators with offset voltage specifications as low as 2.0 mV max for two comparators that were especially intended to...
Description The LM7805 series of three terminal positive regulators is available in the TO-220 package and with a variety of preset output voltages, making them suitable for a wide range...
Description The TO-220 package and a variety of preset output voltages make the LM7809 family of three terminal positive regulators suitable in a wide range of applications. Internal current limiting,...
Description The L78 series of three-terminal positive regulators is available in TO-220, These regulators can provide local on-card regulation, eliminating the distribution problems associated with single-point regulation. Each type embeds...
Description The LM7905 series of three terminal negative regulators is available in TO-IC. with a variety of preset output voltages, making them suitable for a broad range of applications. Internal...
Description The TO-220 packaging and a variety of preset output voltages make the LM7912 family of three terminal negative regulators effective in a wide range of applications. Internal current limiting,...
Description The TO-220 packaging and a variety of preset output voltages make the LM7912 family of three terminal negative regulators effective in a wide range of applications. Internal current limiting,...
Description The LM833 is a monolithic dual operational amplifier that is particularly well suited for audio applications. It features high frequency performance (15MHz Gain Bandwidth product, 7V/s slew rate), low voltage noise (4.5nV/Hz), and...
This LM8LUU 8mm Bushing Longer Linear Ball Bearing is a longer version of our standard LM8LUU linear slide bush for 8mm hardened steel shafts. The Bearings gives you very precise, safe...
